Posts tagged with "micro living":

Placeholder Alt Text

Black glazed tile clads a curved “mega-bay” in San Francisco’s Hayes Valley

facadeplus_logo1
Brought to you with support from
A new market-rate micro-housing project in San Francisco's Hayes Valley—developed in tandem with a new clubhouse for the Boys and Girls Club—features 70 studio and two-bedroom apartments clustered around a courtyard with ample, secure bicycle parking. The wood-framed housing structure sits atop a concrete podium housing retail spaces just off the main Hayes Street corridor. The new construction project continues development of vacated land caused by the collapse and removal of the Central Freeway. The project—designed by David Baker Architects, which has designed and built more than 10,000 dwelling units—achieves a density of 240 bedrooms per acre, and consists of 40-percent two-bedroom units located at each corner and facing the courtyard. This is the result of a policy by the city to allow new residential developments to accommodate families. The other apartments are classified as micro-units, ranging from 325 to 400-square-feet. These compact studio apartments embrace an "affordability by design" concept, which, according to David Baker Architects, has “proven popular with younger professionals, as well as seniors.” One of the most contentious issues of the project was a large corner bay clad in a custom glazed tile. The bay's massing spans the entire end of the building, out of scale when compared with a typical vernacular bay, however, the architects say this feature is rooted in careful planning and urbanistic principles. The positive and negative forms of 388 Fulton and the Richardson Apartments across the street—another project by David Baker Architects—make a frame for the City Hall dome two blocks away.
  • Facade Manufacturer Fireclay Tile (glazed thin brick veneer); James Hardie (fiber-cement siding); Golden State Steel (sun shade fabrication); Peerless Architectural Windows and Doors (aluminum windows)
  • Architects David Baker Architects
  • Facade Installer Fisher Development Inc. (General Contractor)
  • Facade Consultants KPFF Consulting Engineers (Structural Engineer)
  • Location San Francisco, CA
  • Date of Completion 2016
  • System wood frame over concrete podium
  • Products Glazed Thin Brick in Inkwell and custom colors by Fireclay Tile; ENERGSAVE by Peerless Architectural Windows and Doors (aluminum windows); HardiPanel & HardieTrim (fiber-cement siding)
The black coloration was produced from custom low fire glazed tile sourced from local clay. An artisan tile company glazed the brick with a palette of five subtle variations on a standard “Inkwell” black color. The architects specified a repeating pattern for the colors, which Baker said sometimes gets mistaken for being a uniform color. "The different tile colors added a richness to the composition, which one color would not have provided." The thin tile was set directly onto a mortar bed over a cement plastered wood-framed wall. Expansion joints coordinate with punched window openings for a clean composition. The stacked bond tile also integrates precisely with vents on the facade, which required careful coordination between the contractor and architect. The windows in the curved mega-bay have a custom extra-deep extrusion to accommodate the thickness of the glazed tiles. Computer analysis from programs like Autodesk Ecotect was used to optimize perforated aluminum sunshades on the curved facade and west-facing windows. Design criteria included the relative amount of solar radiation that would hit each window for different times of the day and year, including shade from the building, neighboring buildings, and sunshades. After several iterations, the design resulted in a combination louver-and-fin for windows along the curved bay, and a vertical fin of varying length along the west-facing facade. The shapes of these elements were standardized into three repeatable configurations for fabrication efficiency while minimizing solar radiation during the afternoons in late spring and early fall, particularly into studio units with challenging western exposure. Baker said the project team integrated a lot of fun detailing into the project: “The large curved bay is the signature of the building, and something we put a lot of energy into. We took fairly humble materials, and made them look crisp and sleek." A trademark example of this design approach is the “random batten system,” a phrase coined by the office for an aesthetically driven approach to installation of fiber-cement trim board. Baker called this "ranch house technology." The assembly calls for standard fiber cement board trim to be applied in a randomized pattern, transforming a ubiquitous board and batten system into what Baker said, "Looks like something that you would order from Italy."
Placeholder Alt Text

Downtown Miami to get micro-living apartment tower

Miami’s Urban Design Review Board (UDRB) approved a micro-living apartment tower with no parking from entrepreneur and developer Moishe Mana and Zyscovich Architects. The design was approved by the city’s Urban Design Review Board this morning along with the Miami Worldcenter plan, a 10-block, 30-acre development led by Elkus Manfredi architects. The Worldcenter's blueprints were approved despite general concerns over landscaping and architecture. These two schemes indicate that Miami's downtown is on the brink of some major changes. The micro-living tower received an enthusiastic response; according to the Miami Herald,  landscape architect and board member Gerald Marston called the tower by Mana and Zyscovich Architects a “very, very creative addition to the city.” Mana and Zyscovich Architects’ tower, with its small, affordable units and no parking garage, is a welcome change to downtown Miami, which has earned a reputation for its over-the-top condos and elaborate parking garages. UDRB makes recommendations to Miami’s city planning director and had rejected a previous iteration of the Worldcenter plan in 2014. The new Worldcenter complex will replace a massive, multi-block indoor mall with distinct retail buildings, a Marriott Marquis, convention space, and 4.5 acres of open area that will include a north-south pedestrian paseo and two outdoor plazas. Along with its approval, UDRB made recommendations that the open spaces be developed further and that retail shops be added to the ground level. This plan is intended to bring continuity to the Park West neighborhood and make it more available and welcoming to pedestrians. Pedestrian-friendly, micro-living, car-free? What does Miami think it is? L.A.?
Placeholder Alt Text

Is the pod lifestyle on its way back? Fernando Romero thinks so

Mexican architect Fernando Romero has brought back pod living after a 50 year hiatus from the architectural mainframe. Looking like an export from Mars, a new design for pod living by Mexican architect Fernando RomeroThe Nest Pod, is a new take on an old concept.

Working in collaboration with developer Robbie Antonio as part of Revolution Precrafted, the pod concept envisions 1960s modular micro-homes in a new stylish contemporary format. Joining Antonio on board with the project is Zaha Hadid, Sou Fujimoto, and Daniel Libeskind.

Romero aimed to reinvent the versatile modular pod living space. Using geometric guidelines and forms found in nature, Romero said that The Nest Pod "provides passive shading on its most vulnerable sides."

Occupying 1,022 square feet, the humble dwelling is divided along its North-South axis, allowing the space to be naturally ventilated. Nearly all the pod's components are prefabricated, making it easily constructed on site.

https://vimeo.com/148989702 (Courtesy Fernando Romero) (Courtesy Fernando Romero)

Placeholder Alt Text

The scaffolding comes off Carmel Place, New York’s first modular micro-apartment building

The scaffolding just came off of Carmel Place, the 10-story, 55-unit micro-apartment building designed by Brooklyn-based nARCHITECTS. The project, formerly known as My Micro NY, has diminutive units designed to serve the "small household population." The project sits at One Mount Carmel Place, a looping side street boxed in between 28th Street, First Avenue, 27th Street, and Second Avenue in Kips Bay, Manhattan. The towers are vertically striped in four shades of grey brick (as seen in the renderings below), though in some of Field Condition's photographs the brick takes on a brownish hue. The tower is constructed of 92 modular units, which were themselves built in the Brooklyn Navy Yard. The massing somewhat reference's BIG's Two World Trade Center, whose irregularly stacked upper stores are smaller-but-wider to accommodate terraces. The interiors are meant to make the Lilliputian apartments feel as spacious as possible. The ceilings are nine-and-a-half feet tall, and exterior doors slide, rather than swing. Seventy cubic feet of storage spaces over the bathrooms and 70-square-foot kitchens with extra fold-out counter space reduce clutter and allow for full scale movement in the space. Juliet balconies, with a comparatively generous 63 square feet of floor area, allow access to the outdoors. Each of the six different types of units, ranging in size from 273 to 360 square feet, come equipped with interior furnishings. The architects collaborated with New York–based Resource Furniture on the built-ins (like the bed-couch), and other furnishings from Stage 3 Properties through Ollie. Ollie decorates rental apartments, organizes community events in-building, and offers amenities packages that include housekeeping and wifi. Carmel Place offers a standard range of amenities: bike storage, lounge, fitness room, public roof terrace, and community room. 525 square feet of ground-floor retail, plus the glassed-in, street-facing gym, anchors the development to the outside. Here as everywhere, competition for the building's affordable units is intense, with 60,000 applications submitted for the 14 apartments. All tenants could be moving in as early as March 2016.  
Placeholder Alt Text

New York City’s first micro-unit housing complex stacks up in just one month

It took just about one month to fully stack New York City's first modular, micro-unit housing complex. The nARCHITECTS-designed building, known as Carmel Place is located on Manhattan's East Side and offers 55 apartments that range between 260 and 360 square feet. You might remember that the project won Michael Bloomberg's adAPT NYC Competition back in 2013. Field Condition has been visiting Carmel Place over the last month, and recently reported that every one of the building's 66 modules has been set into place. Now that all of the modules are stacked, on-site facade installation is expected to begin. The entire project should wrap up by the end of the year.