This week, architects presented revised plans for the renovation of Marcel Breuer's Central Library in Downtown Atlanta to Fulton County officials and members of the public. The new scheme adds large windows to the building's lower stories, and converts some of the library's common areas into spaces that will be rented out by private interests. At that meeting, Tim Fish of Atlanta firm Cooper Carry previewed design and programmatic changes to the 1980 building. The firm plans to add an atrium and more windows to the front of the building, in addition to upgrading the electrical and mechanical systems. While the 250,000-square-foot library is exclusively public property now, the renovations will convert 50,000 square feet into private, leasable space. Library officials are hoping to rent the ground and second floors to restaurant or university tenants. The portions of the seventh and eighth floors that aren't taken up by mechanical equipment will be rented out to private interests, too. Back in 2016, the city wanted to scrap the Brutalist building and replace it with a contemporary structure. But after an outcry from preservationists in Atlanta and all over the country, the city decided to renovate the library instead. The renovation is expected to cost $50 million in total, and bids for construction work will go out next month. The SaportaReport noted that many residents at the meeting spoke out against the windows scheme, and questioned the need for more natural light, especially as adding multiple windows to an existing building is an expensive proposition.
Posts tagged with "Cooper Carry":
A total of 149 custom panels cover nearly 11,000 sq. ft. of the facade, providing a passive approach to daylighting, glare reduction, shading, and solar heat gain reduction.The Georgia BioScience Training Center is a signature building with a dual purpose: a high-tech facility supporting research critical to bio-manufacturing that brings identity to Georgia’s growing biosciences industry. The 40,305 sq. ft. building is sited approximately 45 miles due east of Atlanta in Social Circle, "Georgia's Greatest Little Town,” and houses laboratories, classrooms, meeting rooms, and large gathering spaces. The building is organized around a large elliptical courtyard lined with glass walls. “Building planning centered on the idea of a “10 minute marketing tour” as the state will tour thousands of future 'prospect' companies through the facility,” says Nathan Williamson, Associate Principal at Cooper Carry. Williamson says the exterior courtyard doubly serves as a breakout space for large meetings and events, while drawing daylight into the training spaces. “By centralizing this natural amenity and event space, all spaces are energized by daylight while vistas create an open, highly-collaborative environment. The result is a high performance design that evokes the sophistication of 21st century bio-manufacturing.” The most striking feature of the building envelope is a large angular metal mesh veil, suspended off the building by a steel frame. Williamson notes the versatility of the aesthetic properties of the material combined with the performance of the veil as a passive solar shading device brought a significant value to the project: "We infused stainless steel into the exterior design to capture the performance benefits of shading while expressing the connections of the system which enhance the client’s brand of a decidedly hi-tech facility. The mesh is expressed independently from the orthogonal main façade with facets and plane changes to provide a dynamic, crystalline aesthetic with ever changing shadows and reflections that suggest a sense of movement." The BioScience Center’s high precision metal facade assembly is a familiar aesthetic for the high-tech students and visitors of the facility. The metal mesh product, named “Lanier” after nearby Lake Lanier, was developed by Cambridge Architectural as a custom solution specific to this project which has become a showcase for the architectural metal company. "We always like to be involved early in the process of any project and work with the architect once the initial design has been established,” says Matt O’Connell, Director of Operations at Cambridge Architectural. “After initial review and discussions with Cooper Carry about their vision, we conducted 3-D modeling. But the computer only goes so far, so we went through multiple specifications and mock up processes, both small and full size, to provide the right mesh fabric for the job.” The rigid panels are fabricated as trapezoidal shapes to account for the faceted panels. When folded into place, the panels assume an orthogonal ribbon-like patterning. Cambridge developed the rigid mesh to allow for a one-directional bend. The product is suspended in tension off a rigid steel frame that allows the dimensions of the panel to be maximized with fewer intermediate supports. The result is a lightweight (1.28psf) panel with a maximum width of 10 feet, and a maximum length of 100 feet. A unique feature of Lanier is the ability to expand and contract the open area of the mesh, by removing fill wires as the pattern repeats. What results is a quality of lightness in the material - the ability to block direct sunlight while maintaining views from within the building. “We know that architects are seeking flexibility and looking for mesh choices that create a more stimulating visual appearance while providing options for varying degrees of light passage,” said Cambridge National Sales Manager David Zeitlin. “In the case of Lanier, they can even choose to expand the openness of the pattern for a single panel. We call this option Transition.” The material has been used for exterior facades, solar shading, parking garages, and interior screen walls.