Paul Andersen’s new space for makers, entrepreneurs, and retailers is now complete in Frederick, Colorado, and provides a new take on what it means to design industrial office space. Responding to the changing landscape of retail, work, and the city, Emerald Workshops was designed to establish a new typology of workspaces focused on engaging the community as much as it engages the economy. The development consists of eight buildings with a total of 56 customizable units. With 26-foot-high ceilings that can accommodate large equipment or even a mezzanine level, the space is suitable for a variety of purposes and tenants throughout. So far an architecture firm, mobility retailer, cross-fit gym, and textile artisans have quickly taken up residence on the campus. The spaces themselves feature large windows and operable glass garage doors to reflect the values of transparency and social interaction. The parking lot, a large, planar design element often bogged down by a single use, has been filled with planters, seating, and lighting to encourage outdoor work as well. Located twenty minutes from Denver, Boulder, and Fort Collins, one goal of the complex was to “bridge the gap between urban main street and spacious rural landscape,” according to a press release. “The buildings are a new take on Colorado’s historic architecture. They combine the false front commercial architecture of the Old West with industrial construction that has been common since the 1960s,” explained Andersen. The exterior features a graphic, contemporary shingling that brings to mind Playskool toy homes almost as much as the Old West vernacular, especially when contrasted with the grey brick "outlining" present across each building and undulating roof lines. “We selected materials for their timelessness, durability, and clean details—in the buildings and the surrounding landscape,” Andersen explained, “The effect of our design approach is to strike a balance between familiar and new architecture, to make a place that is deeply connected to our region and, in its own subtle way, unlike any other commercial project.” Phase one of the campus is now complete, and all of the units have been leased. Phase two is currently under construction with the expected completion of the entire project scheduled for May 2020.
Posts tagged with "Maker Space":
Florida International University to be the first arts and design college to launch a Makerbot Innovation Lab
With 3D printing becoming a major impetus in cultivating startup culture, Florida International University (FIU) is launching a MakerBot Innovation Lab, a 3,000-square-foot makerspace for students and community members to develop product ideas and conduct research. Set to be equipped with 30 state-of-the-art 3D printers and four 3D scanners, the space can serve up to 60 students at a time, with one 3D printer between every two work stations. The school bagged a $185,000 grant from the John S. and James L. Knight Foundation to build the facility. “Miami’s entrepreneurial ecosystem has seen enormous growth over the last few years—adding co-working spaces, mentor and funder networks, educational offerings and a host of events,” Matt Haggman, program director of the Knight Foundation, said in a statement. “But there are few established makerspaces where entrepreneurs can experiment and build. The MakerBot Innovation Lab will help to fill this gap, providing the next generation of Miami talent with a space to realize their ideas and inviting the community to connect toward building a stronger startup culture in our city.” FIU’s College of Architecture + The Arts will be the only arts/design college in the nation to house a MakerBot Innovation Lab, according to John Stuart, associate dean for cultural and community engagement and executive director of Miami Beach Urban Studios. The lab’s launch creates abundant educational opportunities as well as a space for public programs. The makerspace will support workshops for elementary and middle school students, dual enrollment programs for high school students, for-credit classes for FIU students and startup programs for recent graduates. FIU’s Urban Studios, a creative space for the performing and fine arts, will work with FIU colleagues and students in hospitality, medicine, and other disciplines to conceive projects to fulfill a community need, such as outfitting homes to be safer for the disabled. The school will also collaborate with Miami Beach–based Rokk3r Labs, a company "co-builder," to hold workshops, seminars and other programming within the Makerbot Innovation Lab.
|Brought to you by:|
A new installation at the NY Hall of Science celebrates DIY cultureThe recently opened Maker Space at the New York Hall of Science is just what its name implies—a place to make things. The initial installation is by Singer Sewing Company, which donated 18 sewing machines, a garment steamer, finishing iron, and other equipment that will teach children and families the basics of sewing and quilting. Programming will also include workshops about conductive fabrics and soft circuits that can be used in a range of applications. The space is a symbol of work that can come out of fostering a culture of scientific learning through hands-on projects. Designed and fabricated by Brooklyn-based Situ Studio, the Maker Space itself is contained within a plywood 3-pin arch structure based on themes of craft and assembly. “Situ Studio and the New York Hall of Science share the conviction that the act of making itself can and should become a generative part of both learning and design,” said Situ’s Wes Rozen at the opening. “We are thrilled to be able to work with the New York Hall of Science on Maker Space as it is a project which, in many ways, is the embodiment of these values.” Situ's structure arches over approximately 1,200 square feet within the Hall of Science's Central Pavilion, designed by Wallace Harrison for the 1964 World's Fair. The space includes a system of modular acoustical panels, display cases, and storage units that tie into the structure with a series of threaded perforations. Furniture units can be tucked under the structure if more floor space is needed for group activities. With approximately two months for research and schematic design, one month for design development (including sourcing materials and securing sponsorship of some products), and two months for fabrication and installation, Maker Space was realized in a tight time frame and on a limited budget. Situ’s greatest challenge was to develop the design quickly enough that production and installation could begin even before all of the major details had being resolved. Designing flexibility into the structure gave Situ additional time to develop the project. Maker Space was designed by Situ Studio and built by its sister company, Situ Fabrication. The teams worked fluidly between digital models and mock-ups from the very beginning of the project. Parametric models built in Grasshopper were quickly tested in full-scale mockups at all stages. The design embodies Situ's practice as a whole: With a well-equipped fabrication shop adjacent to its offices, projects are frequently developed through iterative models, material studies, prototypes, and full-scale mock-ups. Design ideas are always tested through physical experimentation at the studio. Maker Space was no exception—at one point, a full-scale arch reached across the office and bolted into a pin-up wall covered in drawings and renderings of the construction. Watch a video of the final installation here: Making Maker Space from Situ Studio on Vimeo. From a programmatic standpoint, the Hall of Science wanted a space that enhanced science learning and collaboration in a workshop environment that did not feel like a classroom. Situ's task was to create a structure that leant itself to a wide range of activities, from individual experiments to larger projects, without duplicating a school setting. To that end, the Maker Space structure is a pegboard that simultaneously supports the electrical, acoustical, storage, and display requirements of the space. It is flexible in case future uses call for reconfiguration. Similarly, the joinery of the interlocking arches is emphasized through the use of simple materials and exposed hardware. Openness and transparency were important aspects of the museum's goal for the design. The structure encourages passive observation by curious visitors, who can glimpse activities from the outside. Practically speaking, storage was another big requirement. The museum had to store and access all of the equipment and materials needed to run workshops inside Maker Space so that the environment could transition efficiently from hosting a bustling group of students to being a clean, quiet creative space. Double-sided units woven through the superstructure function as storage on the interior. Display units on the exterior now showcase work made by visitors within the workshop, which in the future will host sessions on topics ranging from soldering and circuitry to using open-source hardware.