Thanks in large part to advances in protective coatings and insulation products, buildings big and small can be clad in a variety of materials; when creatively sheathed, even a basic box can achieve an anything-but-ordinary appearance. Thermocromex (at top) Thermocromex This limestone plaster ultra-high-performance cladding is a technically innovative reformulation that can be applied to virtually any substrate, including CMU, frame/sheathing, tilt wall, poured-in-place concrete, and lightweight blocks/cement. Available in custom colors, Thermocromex delivers a vibrant and permanent finish that requires no other coloring or topcoat. The alkali- and UV-resistant pigments will not fade over time, and the finish is both weatherproof and breathable. Almost no maintenance is required to enjoy the original appearance, year after year. Features a 20-year material performance warranty. Koda XT 3form A product line developed specifically for exterior projects, Koda XT offers color, durability, and design freedom for the most extreme environments and applications. These panels exhibit the highest performance of any engineered resin panels. The material has the added benefits of being constructed from polycarbonate, which is both environmentally responsible and high-performing. ProdEX Prodema With an outer film of PVDF, ProdEX wood panels have no need for regular maintenance. The PVDF film is also anti-graffiti and non-stick, preventing organic matter from accumulating on the panel's surface and reducing the build-up of dust and dirt caused by pollution. ProdEX is a suitable cladding material for ventilated façades, offering protection from rain, sunlight, and external temperature changes. Insulated Metal Panels Metl-Span These state-of-the-art insulated metal panels perform reliably, are aesthetically pleasing, and come with a proven sustainability track record. Cost-effective and energy-efficient, they are easy to install, ensuring a schedule-satisfying build-speed. TerraPreCast Boston Valley Terra Cotta For decades, architectural designs have involved embedding a facing material in precast concrete panels. TerraPreCast is now available as a finishing material for precast concrete. A minimum 30mm solid terra cotta veneer as well as units with custom profiles can be embedded in large precast units. The dovetail profile on the backside of the veneer provides additional surface area for the concrete to adhere to the terra cotta, ensuring a high-strength bond between the two products. This system is ideal for conditions requiring the strength and durability of precast concrete construction, but desiring the myriad of options available in both profile and finish offered by terra cotta. TerraPreCast panels are available in 2-inch height increments from 6 inches to 24 inches. The maximum length for the panel is 60 inches. Custom product available. Metalwërks Arcwall DBV Rainscreen Metalwërks This drained, back-ventilated (DBV) design provides an interesting exterior appearance while protecting the building’s primary air/water seals from the elements. The wall system incorporates exterior moisture resistant applied insulation, engineered furring, and perimeter flashings all outboard of the primary building air barrier. A unique fabrication capability includes a back-scored technique to V-groove the 0.125-inch-thick aluminum plate material down to .040-inch-thick at the fold lines. This method allows the designer to incorporate tighter bend lines, which increases the crispness of the joints and panel edges. The open vertical reveals joint are gasketed to minimize water penetration between the custom panel end-caps and open horizontal joints. The rainscreen system, with its variable patterns, casts numerous shade and light patterns as light changes throughout the day, and the anodized finish creates additional reflections to enhance the effect.
Posts tagged with "Koda XT":
Essentially low-tech solutions with high-tech refinements, shades, shelves, and canopies control the sun while adding an architectural element to the design. CRL-U.S. Aluminum Series 3600 Sunshade System C.R. Laurence The screw spline assembly design (above) features a choice of outrigger profiles with a variety of louver and fascia profiles available. FM 41 InSync Solar This automated exterior-mounted roller shading system blocks the sun before it enters a structure, reducing heat and glare more effectively than interior shading technologies. MagnaShade MechoSystems A unique cradle element supports the shade tube without increasing its diameter, allowing the overall size of the interior roller-shade system to remain compact. InLighten Light Shelf Kawneer Featuring an extruded aluminum chassis and a choice of polycarbonate or aluminum-composite panels, this tilting shelf bounces daylight deep into interior spaces. GreenScreen Revive Mermet USA Available in nine colors, these PVC-free polyester solar-control fabrics reduce glare and reflect light. C2C and GreenGuard Gold certified, the collection is available in 1 percent and 5 percent openness. Cubist Cambridge Architectural This flexible stainless steel mesh has an open area of 80 percent. Available in a maximum width of 144 inches, it weighs 1.85 pounds-per-square foot. Koda XT 3form A custom-molded polycarbonate roof houses PV modules that power the bus shelter's lighting and send additional energy back to the community's electrical power grid. Aluminum Sails Levolux Custom fabricated, these single skin, perforated aluminum sheets control light and heat while giving the structure a distinctive appearance.
The dual role glass plays in architectural design—a material integral to both a building's appearance and its performance—makes selecting a specific product a tricky process. From energy-efficient glazing to decorative dichroic panels, here are a few new items to spur the imagination. Liquidkrystal Lasvit Designed by Ross Lovegrove, these glass panels can be fixed into construction profiles or into building construction-assembly grooves. Specialty colors and finishes are available; panels range in size from 80 by 8 centimeters to 270 by 370 centimeters. Koda XT 3Form Refined design meets extreme durability in this translucent polycarbonate panel material. Specially formulated for exterior applications, it is a cost-effective alternative to glass. 8250 STX Wausau Factory-fabricated as an aluminum knocked-down system, this curtain wall offers glazing contractors an easy-to-install, non-thermal system for low- to mid-rise buildings. It features tubular vertical framing members in lieu of I-beams, to withstand wind loads without twisting at anchor points or buckling. VUE-30 Viracon This high-performance glass coating allows designers to maximize window-to-wall ratios, while exceeding industry and current domestic energy code requirements for sustainable design. The coating is available on any Viracon glass substrate, and can also be combined with silkscreen patterns or digital printing. Optichroic Dichroic Glass Bendheim This laminated glass is available in an assortment of surface combinations, including clear, etched, and etched patterns. It can be produced in sheets as large as 54 by 120 inches, without the long lead-times typically associated with specialty products.