Brought to you with support fromA residence school recently completed in an Indian village roughly 90 miles away from Mumbai integrates passive strategies in the design of its highly ambitious yet modestly budgeted project. The campus of Avarsa Academy consists of seven similar buildings, each with classrooms on the first two floors, and a student dormitory and faculty residences on the upper two floors. The architects of the project, Mumbai-based Case Design, said the school “is uniquely positioned to take advantage of locally shared resources while establishing its own identity as a leader in the education and the development of young women in India.” Referencing local and universal examples of academic, domestic, public and sacred spaces, the project responds to site, program, and climate, addressing the needs of the community to provide a “sanctuary for learning.” The architects collaborated with Transsolar, an international climate engineering firm, to develop the passive climate strategy, which involves a facade design that shades the interior. The building envelope, coordinated with strategic interior program placement, is composed of recessed window walls and cantilevered reinforced concrete slabs. Locally-sourced bamboo screens span floor-to-floor and are composed of a series of vertical chutes with intermediate horizontal braces. One of the most compelling strategies developed by the team was to supply outside air through underground earth ducts. This eliminated unwanted noise from the campus while allowing for natural ventilation of the classrooms. For the structural frame of the building, exposed reinforced concrete construction was paired with locally-sourced stone to provide thermal mass in occupied spaces, thus producing a moderate, more consistent radiant temperature. The air from all classrooms and living spaces passively transfers in three separate, centrally located “exhaust cavities” which are integrated into the structural core of the building and eventually extend out as solar chimneys above roof level. These chimneys, using solar heat from the sun, are designed to passively drive the entire air flow, and provide cooling, throughout the building. Transsolar said that these design strategies reduced initial construction cost by approximately 7% through elimination of mechanical systems, and reduced annual energy cost by 80% due to its completely passive design. A handful of solar water heaters provides hot water for showers and PV panels on the building roof supplies electricity for ceiling fans and electric lighting in the building, making it also a Net-zero Energy Building.
Posts tagged with "case design":
Calling architects, engineers, fabricators, consultants, and other design professionals: don’t miss your opportunity to join the industry’s leading innovators in our series of hands-on technology workshops and in-depth dialog workshops, only at the premiere conference for high-performance building envelopes – Facades+ PERFORMANCE Chicago, October 24th-25th! Register today to take advantage of our Early Bird Special and be ready to get your hands dirty with the latest tools and techniques that are changing the face of contemporary architecture. Join Jonathan Schumacher and Mostapha Roudsari of Thornton Tomasetti, Nathan Miller of CASE Design, Ronnie Parsons of Mode Lab, and other industry professionals for our full-day tech workshops, and gain the valuable skills necessary to deliver cutting-edge facades in today’s dynamic architectural landscape. Registered architects can earn 8 AIA LU credits as they catch up on the ever-evolving tools of the trade in the Mies van der Rohe-designed Illinois Institute of Technology’s Main Campus in Chicago, so don’t miss out! Following the series of stimulating presentations and lectures on day one of the conference, attendees will have the chance to choose from either two seminar-style dialog workshops or one of six daylong tech workshops, presented in conjunction with Mode Collective. In small, one-on-one, classroom settings, participants will gain the knowledge and skills to work with the latest in cutting edge design and analysis technologies to push your practice’s facades to the highest standards of performance. Learn the mechanisms for creating performance-based parametric systems and dynamic patterning with Grasshopper. Explore emerging techniques for the rationalitazion of envelope surfaces and the fundamental concepts of facade panelization and optimization with Galapagos and Kangaroo. Develop new skills for generating facade geometry, utilizing analysis information and managing complex parameters with Dynamo. Gain hands-on experience in the most up-to-date environmental analysis technologies to discover the next generation of high-performance building envelope design. All of this and more, more, more make AN and Enclos' Facades+ PERFORMANCE Chicago the event of the season for groundbreaking facade technologies. Our Early Bird special ends today, so sign up now to take advantage of this great deal. See you in Chicago!
On February 17, David Fano will lead Revit Design, a workshop exploring the possibilities of the digital design program Revit, as part of DAY 2 of COLLABORATION, a conference on fabrication and facades sponsored by The Architect's Newspaper. In 2008, David Fano established CASE Design, a Building Information Modeling (BIM) consultancy in New York. Prior to CASE, Fano was Director of Technology Research at SHoP Architects, where he managed technology R&D initiatives, worked with project teams to ensure the successful implementation of BIM, and developed “direct to fabrication” initiatives with software manufacturers and fabricators through the use of BIM. He contributed technology expertise on numerous projects, including for a 41-story rental tower in New York City and for The New Seaport, an 860,000-square-feet multi-use development in New York City’s Historic Seaport District. Since 2006, David has been an Adjunct Professor at Columbia University’s Graduate School of Architecture, Planning, and Preservation where he teaches seminars and workshops focusing on the impact of technology on design processes. David received his Master of Architecture with honors from Columbia University where he was the recipient of the Lucille Smyser Lowenfish Memorial Prize and the Computer Aided Design Honor Award. On February 17, David will present the day-long workshop, Revit Design, building from fundamental Revit design concepts to advanced techniques concentrating on how the formal and organizational potentials emerge from informational modeling. Register here.