If the steady stream of newly announced mass wood projects is any indication, mass timber building technologies are poised to take the American construction and design industries by storm over the next few years. As products like cross-laminated timber (CLT), nail-laminated timber (NLT), glue-laminated timber (glulam), and dowel-laminated timber (DLT) begin to make their way into widespread use, designers, engineers, and builders alike are searching for the best—and sometimes, most extreme—applications for mass timber technologies. But rather than reinvent the wheel, American designers can look to experienced mass timber designers in Europe and Canada for key lessons as they begin to test the limits of these materials in the United States. European and Canadian architects and researchers have long been at the forefront of mass timber design, starting with early experiments in the 1970s. By the 1990s, researchers like Julius K. Natterer at the Federal Institute of Technology in Lausanne, Switzerland, were developing initial CLT prototypes. Natterer’s work has been buttressed by that of many others, including research performed at the Norwegian Institute of Wood Technology under Thomas Orskaug and experiments conducted at the Technical University of Munich under Stefan Winter. One key lesson European timber projects teach is that when it comes to structural systems, weight matters. On average, mass timber assemblies weigh between one-third and one-fifth as much as concrete structures, despite equivalent structural capacities. As a result, mass timber buildings are much lighter than concrete ones, a positive for building in tricky urban situations, for example—where underground rail yards, subway tunnels, and municipal utilities place limits on how heavy and tall buildings can be. London-based Waugh Thistleton Architects (WTA), for example, recently completed work on Dalston Lane, a 121-unit CLT midrise complex located above a tunnel serving the Eurostar train line in the city’s Hackney neighborhood. For the project, the architects worked with timber-engineering specialists Ramboll to develop a stepped tower cluster rising between five and ten stories tall. CLT panels are used for the external, party, and core walls of the building, as well as the stairs and the building’s floors. The variegated massing is due directly to the architect’s use of CLT construction, which resulted in a lighter building that allowed the designers to build taller without more extensive foundations. The resulting building, with its staggered massing, better maximizes daylight infiltration into apartment units. The added height allowed the architects to add 50 more units to the project than originally permitted, a testament to just how light CLT can be. Andrew Waugh of WTA said, “Timber buildings are just simpler, cheaper, and nicer [than concrete ones]. High-density urban housing should be built using mass timber.” Lighter mass timber buildings also perform better in seismic zones. Since the lighter buildings carry less inertia, the potential for catastrophic swaying goes down. The strategy was applied this year with the Brock Commons tower, an 18-story, 400-bed college dormitory designed by Vancouver-based Acton Ostry Architects for the University of British Columbia Point Grey campus. The tower is made up of a hybrid structural system that includes CLT floor slabs, glulam columns, steel connectors, and dual concrete cores. The concrete cores anchor the light mass wood structure in place, helping to counteract seismic and wind-generated forces. The 173-foot-tall structure is currently considered the tallest mass timber building in the world, and the construction is particularly multifaceted, utilizing a specifically fabricated set of interdependent building materials and finishes to meet structural and fire-safety regulations. The Brock Commons tower’s hybrid structural system brings to light another valuable lesson: that above certain heights—ten to twelve stories—the lightness of mass timber construction becomes a liability with regard to wind loads. The lack of physical mass at the highest parts of a prototypical timber tower results in increased deflection from wind loads. Ola Jonsson, partner architect at Swedish architecture firm C.F. Møller, recommended architects “go back to thinking about construction when designing mass timber structures,” as a way of rethinking approaches to dealing with difficult-to-manage structural conditions. He added, “It’s so early [in the adoption of mass timber technologies] that few really know how to do it well.” The architect said that with certain tall timber tower projects the office is working on, designers had to develop new massing strategies to limit wind loads. Jonsson continued, “Many engineers lack experience in mass timber, so architects have to become central figures in construction and design during this early phase of adoption.” The firm is currently developing over ten mass timber projects, an emerging body of work that came out of earlier mass timber competition entries developed by C.F. Møller that took the world by storm. C.F. Møller recently entered into a partnership with HSB Stockholm—Sweden’s largest housing association—to design a series of new mass timber housing towers, including the 34-story Västerbroplan tower designed with concrete cores and wraparound terraces. The tower’s columns and beams will consist of a blend of CLT and solid timber. The building’s terraces will come with integrated exterior curtains and will be fully enclosed by a steel superstructure containing glass panels. The tip of the building is designed to dematerialize as it steps back along two facades, creating a series of exposed terraces and planted areas. Like Brock Commons, Västerbroplan tower features a hybrid structural system that is “resource-effective,” according to Jonsson, meaning both lightweight and rigid. The firm is also at work on a 20-story bundled housing tower called Hagastaden for HSB Stockholm, this one designed as part of a new quarter of the city that will contain mixed uses and generous pedestrian areas. The tower features varied floor heights designed to accommodate divergent uses like student flats, penthouse apartments, and typical family-occupied units. Aside from the firm’s multiple mass timber projects, C.F. Møller is working as part of an interdisciplinary research team that is developing new strategies around mass timber towers rising 20 stories or more. The group—backed by SP Technical Research Institute of Sweden, Växjö Municipality, and Linnaeus University, among others—will investigate mass timber construction from a fire-safety, life cycle, and construction technology perspective. Regarding the research project, Jonsson explained, "Massive wood constructions give urban planners, architects, and designers great possibilities to develop innovative and sustainable architecture,” adding, "but a broader knowledge and more practical experience in the industry is needed." Another paradigm-shifting impact mass timber construction has had on European building methods relates directly to the construction process. Because mass timber elements are factory-produced to order, the relationship between engineer, builder, and architect is extremely integrated. Cory Scrivner, mass timber specialist with Canadian mass timber manufacturer Structurlam, said, “For us, it’s all about the 3-D model. [Digital modeling and coordination] are all done before we go into production in the factory: Everything has already been approved by the architect, engineer, and our team.” Scrivner explained further that the intense coordination was necessary, as “we are designing a building made from components that are accurate within one to two millimeters of the digital model.” The designers behind Brock Commons utilized Structurlam as the mass timber manufacturer for the project. The advanced level of project coordination and off-site fabrication meant that project was finished roughly four months ahead of schedule, with a time-lapse video on a project website showing construction crews erecting upward of two floors per day. The first story for the project was built from cast-in-place concrete, while the remaining 17 stories are built in mass wood. The structural system utilizes glulam columns, steel connectors, and a two-way spanning CLT flat-slab. The design creates a floor beam–free structure that could be erected start-to-finish in nine and a half weeks. The rapid-fire construction time line, however, comes at the expense of longer planning and design phases prior to any work boots hitting the job site, as the teams must become absolutely synced prior to fabrication. Waugh of WTA explained that often with timber buildings, the firm asks its clients to “give us more time now [in the planning stages of construction] and we’ll save you even more time on the back end.” Waugh added, “The better programmed the construction process, the faster and more accurately the buildings come out.” Waugh said that after erecting several mass timber structures, the firm had “gotten so much better at it” than when they first started. One area of improvement has been material usage, which decreased with each project as the structural capabilities of mass timber have been further explored, tested, and certified. The Dalston Station project mentioned earlier, for example, utilized about two-thirds as much timber as the firm’s first mass timber project erected a decade ago. Part of the reason for the improvements, Waugh and Jonsson agreed, results from designers’ greater awareness of and comfort with the construction process. “To design well in mass timber, you need an architect who wants to understand that the nature of [the architect] is one of a ‘master builder’ as well as one of a ‘master designer,’” Waugh explained. Since mass timber construction methodologies are based on kit-of-parts assembly systems of mass-produced panel types and structural elements, there has been increased interest among European and Canadian firms in building high-density mass timber housing. These experiments have positive implications for the many American cities burdened with housing shortages and long project-approval times. Waugh explained that WTA’s focus rests on expanding the abundance of available housing through mass timber construction. He said, “We design everything in our office now as if it was a mass timber project. Concrete projects are becoming more and more rare.” Several projects in the works, like Shigeru Ban’s recently proposed 19-story Terrace House in Vancouver, Michael Green Architecture’s 35-story Baobab building in Paris, and PLP Architecture’s 80-story addition to the Barbican housing estate in London, point toward a wider adoption of tall and supertall mass timber housing towers. With faster construction times and fabrication that can occur in tandem with permitting, mass timber has the potential to help cities add housing rapidly, safely, and efficiently. Waugh added, “Humanity is becoming more urban, so the principal job of an architect in the 21st century is to develop high-density urban housing. In an era of climate change, it behooves you [as a designer] to reduce the amount of carbon emitted. Again, for us, mass timber is a way to do that.”
Posts tagged with "C. F. Møller":
Denmark’s recently opened maximum-security Storstrøm Prison, the second-largest in the country, is meant to evoke feelings of a small provincial village, according to Scandinavian designers C.F. Møller Architects. Housing 250 inmates, the prison is meant to be rehabilitative while allowing prisoners to avoid the loss of social skills that comes with institutionalization. C.F. Møller has described it the “world’s most humane” prison. Located on Denmark’s Falster island, Storstrøm Prison is organized around central community buildings and laid out more like a campus than a traditional prison. The four prisoner wings and maximum-security hall are sited in such a way as to mimic the urban fabric of the surrounding villages and form streets and squares, softening the transition between open society to a prison. All ten buildings, totaling 115,000-square feet altogether, are kept to a town-like scale as well and are generally the same height. The designers chose to model Storstrøm Prison after a miniature society that would provide inmates with social and practical skills, in keeping with the Scandinavian tradition of encouraging reform among inmates rather than enacting harsh punishment. C.F. Møller chose to work different materials into each of the buildings on the site based on their programming. The five wings have been given a patterned brick façade, the activity building is a mix of concrete panels and glass, and the workshop building is clad in steel panels and concrete. The concrete is also embossed with a circular pattern throughout the campus in an attempt to keep the walls from feeling too institutional. The attention to making the inmates and administrative staff feel comfortable extends to the interiors as well. Because natural lighting was emphasized throughout the project, all of the communal rooms and cells have large windows that are tilted to let viewers to take in the landscape up to the surrounding perimeter wall, without allowing anyone to see inside. A neutral color palette was chosen for the interior, to produce an effect that is calming without being too sterile. A double-height church and several non-denominational worship rooms are also available for both the prisoners and guards to use. Communality is also emphasized, as cells are grouped in units of four to seven grouped around a shared hub, with access to a living room and kitchen where inmates can make their own meals. The cells themselves are curved instead of being harshly angled, so that inmates can see the entire room from the door, while multiple windows fill their rooms with natural light. Still, despite the amenities, the island is first and foremost a prison. A 20-foot wall surrounds the correctional facility, the entire island is covered in cameras, and steel wires are stretched across the top of each building to prevent helicopters from landing on them. Storstrøm Prison is the result of a $160 million commission from the Danish Prison Service, as an attempt to create an environment that would help inmates more readily transition back to society after being released.
"The eye-catching screen reflects the innovation and creativity that characterizes the various institutes which it unites."The University of Southern Denmark has a new, shared research and education facility by C. F. Møller Architects that combines four academic research institutes into one shared academic research facility. The various groups are connected by a central canyon-like social space with bridges that span the atrium overhead, linking the institutes. The organization of the building is primarily influenced by SDU’s 1970’s era structuralist campus design by architects Krohn & Hartvig Rasmussen that incorporated reinforced concrete construction and cor-ten steel in a linear site layout. The building envelope is predominantly a glass curtainwall with a custom exterior concrete screen made from pre-fab panels of white CRC concrete (Compact Reinforced Composite, a special type of Fiber Reinforced High Performance Concrete with high strength) featuring circular openings with an underlying solar screen and natural ventilation.
The architects say that the composition of the screen avoids a dull repetitive patterning, yet manages to save costs due to a modular assembly comprised of only 7 unique cast profiles. Data from key views, solar shading, and structural requirements provide parameters to control circular opening sizes (from 4 inches to 6 feet in diameter) and locations with respect to interior functions. Structural integrity of the panel connection points added further challenges to the design of the custom screen. Julian Weyer, partner at C. F. Møller, says a collaboration between the fabricator and installer simplified the process: “mockups were used to qualify the design process and especially the design possibilities and constraints of the concrete screen.” The circular patterning of the CRC screen extends onto the roof where variously sized circular skylights bring daylight into the central atrium. This establishes one of the most successful spaces in the building. “The experience of the day lit ‘canyons’ inside and between the labs feels both intimate and spacious,” Weyer says. The building meets the strict Danish building code requirements for low-energy class 2015, which addresses various environmental criteria including minimal energy consumption, good indoor climate and use of materials with a low environmental impact in a life cycle perspective. While the project was designed roughly at the same time as Henning Larsen Architects’ Kolding Campus, a mere 7-minute walk away, the two SDU projects were not directly influential on each other, however Weyer says both contribute to “an already solid Danish tradition for open ‘learning landscapes’ and innovative educational buildings” citing prior C. F. Møller projects such as the Maersk Building in Copenhagen, the A.P. Møller School in Schleswig and the Vitus Bering Innovation Park in Horsens as notable precursors.
The capital of the happiest country in the world, Denmark*, will soon get a new multi-purpose waterfront development. This week, Scandinavian architecture firm, C. F. Møller Landscape, won the “Nordhavn Islands” international competition to design part of the waterfront in the growing Nordhavn district, a harbor area in Copenhagen. The firm’s project proposes “an innovative learning, activity and water landscape” adjacent to a planned international school (which C. F. Møller is also designing). Three floating classrooms would give students opportunities to learn outside, even fish and kayak. The design blends a range of concepts—the urban park, the educational classroom, and the recreational community center—right on the waterfront. The Møller proposal features three separate “islands” ringed with low-maintenance plantings: “'The Reef,’ a multifunctional platform for aqua learning and events in extension of the quayside; ‘The Lagoon,' a floating arena for activities such as kayak polo and other water sports, and ‘The Sun Bath,’ an actual harbor bath with a sauna and protected areas for swimming training,” notes the firm in a press release. "We are passionate about creating new urban and landscape spaces that focus on integrating building and landscape because we believe that it adds value to the project concerned and to the city as a whole,” said C. F. Møller head, Lasse Palm, in a statement. Nordhavn Islands and the Copenhagen International School—that will be the largest school in the city—are expected to open summer 2017. *The United States is ranked the 13th happiest country by the way, in a recent report that found correlations between the happiness of a country's citizens with gross domestic product per-capita, social support, health, and other factors.