Posts tagged with "bioscience":

Placeholder Alt Text

220-unit residential project in St. Louis bioscience and technology complex unveiled

Kansas City–based architect el dorado and developer Silliman have released schematic designs for a mixed-use commercial and multi-family residential project as part of a larger development, Cortex 3.0, a bioscience and technology research community in St. Louis. The project will include 180,000 square feet of residential and 20,000 square feet of retail throughout seven stories. The approximately 220 apartment units range from studios to two bedrooms and balconies are nestled in setbacks along the building facade. Though materials have not yet been designated, initial renderings envision the project wrapped in corrugated metal, referencing the site’s industrial past. The growing Cortex district will also include a hotel designed by Boston-based Group One and a new office building designed by the St. Louis office of HOK. El dorado’s project is expected to be complete by the end of 2018.

Architect: el dorado Client: Cortex Location: St. Louis
Placeholder Alt Text

Small town receives new high-tech science facility dressed in a dynamic crystalline metal mesh veil

A total of 149 custom panels cover nearly 11,000 sq. ft. of the facade, providing a passive approach to daylighting, glare reduction, shading, and solar heat gain reduction.

The Georgia BioScience Training Center is a signature building with a dual purpose: a high-tech facility supporting research critical to bio-manufacturing that brings identity to Georgia’s growing biosciences industry. The 40,305 sq. ft. building is sited approximately 45 miles due east of Atlanta in Social Circle, "Georgia's Greatest Little Town,” and houses laboratories, classrooms, meeting rooms, and large gathering spaces. The building is organized around a large elliptical courtyard lined with glass walls. “Building planning centered on the idea of a “10 minute marketing tour” as the state will tour thousands of future 'prospect' companies through the facility,” says Nathan Williamson, Associate Principal at Cooper Carry. Williamson says the exterior courtyard doubly serves as a breakout space for large meetings and events, while drawing daylight into the training spaces. “By centralizing this natural amenity and event space, all spaces are energized by daylight while vistas create an open, highly-collaborative environment. The result is a high performance design that evokes the sophistication of 21st century bio-manufacturing.” The most striking feature of the building envelope is a large angular metal mesh veil, suspended off the building by a steel frame. Williamson notes the versatility of the aesthetic properties of the material combined with the performance of the veil as a passive solar shading device brought a significant value to the project: "We infused stainless steel into the exterior design to capture the performance benefits of shading while expressing the connections of the system which enhance the client’s brand of a decidedly hi-tech facility. The mesh is expressed independently from the orthogonal main façade with facets and plane changes to provide a dynamic, crystalline aesthetic with ever changing shadows and reflections that suggest a sense of movement." The BioScience Center’s high precision metal facade assembly is a familiar aesthetic for the high-tech students and visitors of the facility.
  • Facade Manufacturer Cambridge Architectural
  • Architects Cooper Carry - Atlanta
  • Facade Installer L&S Erectors, Inc. - Litchfield, Ohio
  • Facade Consultants Whiting-Turner – Atlanta (Construction Manager)
  • Location Social Circle, Georgia
  • Date of Completion September, 2015
  • System Rigid metal mesh panels attached to a steel frame with Clevis in tension system
  • Products “Lanier” Metal Mesh pattern, by Cambridge Architectural
The metal mesh product, named “Lanier” after nearby Lake Lanier, was developed by Cambridge Architectural as a custom solution specific to this project which has become a showcase for the architectural metal company. "We always like to be involved early in the process of any project and work with the architect once the initial design has been established,” says Matt O’Connell, Director of Operations at Cambridge Architectural. “After initial review and discussions with Cooper Carry about their vision, we conducted 3-D modeling. But the computer only goes so far, so we went through multiple specifications and mock up processes, both small and full size, to provide the right mesh fabric for the job.”  The rigid panels are fabricated as trapezoidal shapes to account for the faceted panels. When folded into place, the panels assume an orthogonal ribbon-like patterning. Cambridge developed the rigid mesh to allow for a one-directional bend. The product is suspended in tension off a rigid steel frame that allows the dimensions of the panel to be maximized with fewer intermediate supports. The result is a lightweight (1.28psf) panel with a maximum width of 10 feet, and a maximum length of 100 feet. A unique feature of Lanier is the ability to expand and contract the open area of the mesh, by removing fill wires as the pattern repeats. What results is a quality of lightness in the material - the ability to block direct sunlight while maintaining views from within the building. “We know that architects are seeking flexibility and looking for mesh choices that create a more stimulating visual appearance while providing options for varying degrees of light passage,” said Cambridge National Sales Manager David Zeitlin. “In the case of Lanier, they can even choose to expand the openness of the pattern for a single panel. We call this option Transition.” The material has been used for exterior facades, solar shading, parking garages, and interior screen walls.
Placeholder Alt Text

Massive Monsanto expansion in St. Louis suburbs has urbanists asking, “Why not downtown?”

Agribusiness titan Monsanto has pledged hundreds of millions of dollars in upgrades to its research facility outside St. Louis, and design details are starting to pop up. Cannon Design will plan, design and engineer a new 400,000 square foot center for life sciences research. The expansion will bring 675 new employees to Chesterfield, on the western fringe of the St. Louis metropolitan area. Those jobs will be mainly high-paying research positions, encouraging for suburban Chesterfield after tax revenue sagged following 2009 layoffs at Pfizer, another major tenant of the business complex. But, as NextSTL points out, some urbanists would rather see such development closer to the urban core—namely in the CORTEX bioscience district in the city’s Central West End neighborhood. CORTEX would turn an old telephone factory and other industrial buildings into a biotech business district along Duncan Avenue.